AQUA-DICHT
Fibrous repair sealing compound
AQUA-DICHT helps with nearly every sealing problem.
If there are holes, cracks, dry or wet surfaces - AQUA-DICHT adheres quickly and reliably to nearly all surfaces like aluminium, zinc, lead, glass, stone, asphalt, corrugated asbestos, roofing felt, hard PVC, bituminous waterproof sheeting and wood - even under water.
- Seals ventilation pipes, ducts and sewers immediately
- Seals cracks and holes in bituminous waterproof sheeting immediately
-
Seals everywhere in roofs (including flat roofs)
Features:
- versatile application
- can be used in all weathers, come rain or snow
- adheres to most substrates, dry and wet
- adheres without primer
- seals immediately, even under water
- bridges cracks and holes several mm across
Areas of application:
AQUA - DICHT adheres to nearly all substrates in and around the house, boat and caravan, e.g. to aluminium, zinc, lead, glass, stone, asphalt, corrugated asbestos, roofing felt, hard-PVC, roofing tiles, tiles, wood. It is also suitable for skylights, gutters, chimney connections, sheet- metal covers and similar. Unsuitable for foamed polystyrene and not resistant to solvents.
Instructions for use:
Remove dirt and loose parts. AQUA - DICHT is ready for use. Apply in a thick layer, using with a brush or rubber spreader, perpendicular to the crack. In extreme cases, and in the case of larger holes and cracks, embed glass-fleece into the freshly applied layer and add a second layer after a few days. Remaines sticky on the surface. For porous substrates (e.g. porous concrete) a primer should be used. Clean tools with nitro thinner.